000 04388nam a22005055i 4500
001 978-3-031-79721-7
003 DE-He213
005 20240730164144.0
007 cr nn 008mamaa
008 220601s2018 sz | s |||| 0|eng d
020 _a9783031797217
_9978-3-031-79721-7
024 7 _a10.1007/978-3-031-79721-7
_2doi
050 4 _aT1-995
072 7 _aTBC
_2bicssc
072 7 _aTEC000000
_2bisacsh
072 7 _aTBC
_2thema
082 0 4 _a620
_223
100 1 _aSubhash, Ghatu.
_eauthor.
_4aut
_4http://id.loc.gov/vocabulary/relators/aut
_982427
245 1 0 _aMechanics of Materials Laboratory Course
_h[electronic resource] /
_cby Ghatu Subhash, Shannon Ridgeway.
250 _a1st ed. 2018.
264 1 _aCham :
_bSpringer International Publishing :
_bImprint: Springer,
_c2018.
300 _aXXII, 204 p.
_bonline resource.
336 _atext
_btxt
_2rdacontent
337 _acomputer
_bc
_2rdamedia
338 _aonline resource
_bcr
_2rdacarrier
347 _atext file
_bPDF
_2rda
490 1 _aSynthesis / SEM Lectures on Experimental Mechanics,
_x2577-6088
505 0 _aPreface -- Dynamic Data Acquisition and Uncertainty in Measurements -- Design and Build a Transducer to Measure the Weight of an Object -- Stress--Strain Response of Materials -- Thin-walled Pressure Vessels -- Strength of Adhesive Joints -- Creep Behavior of Metals -- Charpy Impact Testing -- Flexural Loading, Beam Deflections, and Stress Concentration -- Wave Propagation in Elastic Solids and Dynamic Testing of Materials -- Authors' Biographies.
520 _aThis book is designed to provide lecture notes (theory) and experimental design of major concepts typically taught in most Mechanics of Materials courses in a sophomore- or junior-level Mechanical or Civil Engineering curriculum. Several essential concepts that engineers encounter in practice, such as statistical data treatment, uncertainty analysis, and Monte Carlo simulations, are incorporated into the experiments where applicable, and will become integral to each laboratory assignment. Use of common strain (stress) measurement techniques, such as strain gages, are emphasized. Application of basic electrical circuits, such as Wheatstone bridge for strain measurement, and use of load cells, accelerometers, etc., are employed in experiments. Stress analysis under commonly applied loads such as axial loading (compression and tension), shear loading, flexural loading (cantilever and four-point bending), impact loading, adhesive strength, creep, etc., are covered. LabVIEW software with relevant data acquisition (DAQ) system is used for all experiments. Two final projects each spanning 2-3 weeks are included: (i) flexural loading with stress intensity factor determination and (ii) dynamic stress wave propagation in a slender rod and determination of the stress-strain curves at high strain rates. The book provides theoretical concepts that are pertinent to each laboratory experiment and prelab assignment that a student should complete to prepare for the laboratory. Instructions for securing off-the-shelf components to design each experiment and their assembly (with figures) are provided. Calibration procedure is emphasized whenever students assemble components or design experiments. Detailed instructions for conducting experiments and table format for data gathering are provided. Each lab assignment has a set of questions to be answered upon completion of experiment and data analysis. Lecture notes provide detailed instructions on how to use LabVIEW software for data gathering during the experiment and conduct data analysis.
650 0 _aEngineering.
_99405
650 0 _aMechanical engineering.
_95856
650 1 4 _aTechnology and Engineering.
_982428
650 2 4 _aMechanical Engineering.
_95856
700 1 _aRidgeway, Shannon.
_eauthor.
_4aut
_4http://id.loc.gov/vocabulary/relators/aut
_982429
710 2 _aSpringerLink (Online service)
_982430
773 0 _tSpringer Nature eBook
776 0 8 _iPrinted edition:
_z9783031797224
776 0 8 _iPrinted edition:
_z9783031797200
776 0 8 _iPrinted edition:
_z9783031797231
830 0 _aSynthesis / SEM Lectures on Experimental Mechanics,
_x2577-6088
_982431
856 4 0 _uhttps://doi.org/10.1007/978-3-031-79721-7
912 _aZDB-2-SXSC
942 _cEBK
999 _c85352
_d85352